A dark creek winding between dense palmetto and cabbage palms under a bright sky

Chimney sweeping and cleaning in Winter Springs.

Soot and creosote come off the flue and off the shelf above the damper under a sweep's brushes, and the firebox and any stove pipe get cleared too. Call the office, or leave a request on the form at any time of day.

An illustration of the smoke chamber above a fireplace opening, where creosote settles
Illustration
  • Based in Winter SpringsIn Seminole County
  • A call backTogether we pick the day
  • Request formAlways open

Photo: Cross Seminole Trail - soldier creek, Mikasb, CC BY-SA 4.0

A sweep, step by step.

What comes off the walls, when the next one is due, and what to sort out ahead of the first fire of the season.

  1. What the brushes lift.

    A wood fire leaves a film inside the flue. While fresh it is dry and easily brushed off. Repeated slow, smoky burns turn it to sticky tar, then to a glossy hard glaze that bristles hardly dent.

    We begin at the damper and work up to the cap, then clear the smoke shelf and finish with the firebox floor. Whatever comes loose goes out of the house with us instead of staying to burn.

    An illustration of the smoke chamber above a fireplace opening, cut open, with the fire glowing below
    Illustration
  2. Working out the next sweep.

    It depends on how you burn. Nightly fires lay down deposit much faster than a few fires over a cool season, and a thick or glossy coat means a sweep is overdue.

    NFPA 211 recommends an inspection every year regardless of use. The inspection reveals the build-up, so a sweep and an inspection often happen in one visit.

    Fireplace season is brief here. Census Bureau estimates for 2020 to 2024 show about 94 percent of Winter Springs homes (13,961 of 14,893) heating mainly with electricity, and 23 homes (margin of error 37) with wood as the main fuel. A flue used now and then still collects soot, and an unused one can fill with leaves and nests, so the annual check is where to start.

  3. What a clean flue achieves.

    Built-up creosote can ignite inside the flue, which is how chimney fires start; take the deposit away and a stray spark finds little to burn.

    Draft improves as well: smoke should rise and leave, but through a coated or partly blocked flue it may spill into the living space the moment the damper is opened.

  4. Stoves, inserts and gas logs.

    A stove turned down for the night burns cool, and cool smoke drops the most creosote, mostly in the connector pipe.

    For a stove, every stage of the smoke path is covered: the connector off the stove and each joint in it, the flue or liner above, and the cap. Gas is another matter. Where a flue once carried wood smoke, the Florida Building Code's Fuel Gas volume requires that passage to be free of obstructions and combustible deposits, cleaned first if it served solid fuel (501.15.2). The passage must also be examined before an appliance is swapped (503.5.6).

  5. Up on the cap.

    Cooled smoke drops soot onto the cap's mesh. That mesh is also what stops sparks, so a clogged one weakens the draft and defeats its own purpose, and we clear it on every visit. Birds and bats move into Florida flues too. Federal law protects chimney swifts, and bats may not be excluded between mid-April and mid-August, which means a flue with wildlife in it waits for the right season.

  6. Smells in muggy weather.

    The usual cause is creosote. A flue that has seen use holds a little, and in thick damp air, or when the draft reverses, the odor settles down into the room. The source goes with the sweep; a damper kept shut and a cap kept on deal with any trace.

Schedule a sweep

Questions about sweeping.

Short answers, with a source where there is one.

When is a sweep due?

Look at how thick the coat is rather than counting months. The yearly inspection NFPA 211 recommends shows what has built up and its type; a glossy or tarry coat means the sweep should happen soon.

Sweep or inspection first?

An inspection examines the entire chimney against NFPA 211's three levels. As soot can hide damage, one visit often does both jobs.

What is glazed creosote?

Deposit that has set into a slick dark crust, usually where smoke cools slowly, as in a stove damped down for the night. Brushes hardly mark it, so finding some is a cue to book promptly.

Do gas fireplaces get swept?

There is no creosote to remove, but the vent has to remain clear. The Chimney Safety Institute of America recommends yearly inspection of gas-fired chimneys as well, since debris or a nest can obstruct the flue.

Why is the smell worse when it is hot?

Hot, humid air carries creosote odor, and a downdraft can drive it indoors. Remove the deposit and nothing is left to smell.

How do I book?

Phone (689) 302-8275. The form lower down also works, and it takes requests whatever the hour; someone calls back to set a day.

What have you noticed?

Write it down on the form, or just call. Someone returns your call and together you pick a day.

  1. 1Get in touch Use the phone or the short form.
  2. 2Hear back from us A call comes to you, and a day is chosen.
  3. 3Roof to hearth We check the stack in order, top to bottom.
  4. 4Up to you You hear what we found and decide what comes next.

Phone

Call and describe what you need.

(689) 302-8275

Request form

Open day and night

Photo: Econlockhatchee River from the Florida Trail bridge, Trougnouf, CC BY-SA 3.0

What do you need?

Which service?

About your fireplace

What does it burn?

Reaching you

Best time for the call back

Back

A cooler spell approaching, or a storm that left damage up on the roof? Let us know.